How To Choose The Best Ultrasonic Jewelry Cleaner To Clean Jewelry At Home

You wear expensive jewelry carefully and correctly, but over time, the products lose their shine. The appearance of gold and silver jewelry is influenced by external factors. By using the best jewelry cleaner, you can maintain this luster of jewelry forever. 

Metals tend to oxidize when exposed to oxygen in the air. This reaction gives a plaque to the surface of the jewels. The metals react with aggressive chemicals, detergents, cosmetics, perfumes, and chlorinated water. Dust, dirt, scales, and villi clog in holes of an ornament, in a ring frame, chain links, and this process becomes even faster with perfumes and chlorinated water. The domestic method of cleaning with a soapy solution is not able to wash the dirt from hard-to-reach areas of expensive jewelry. Ultrasonic cleaning is very high quality and fast procedure that allows you to remove dirt from all sources of products of all sizes and shapes. 

A qualified specialist can surely make your jewelry shine. Modern ultrasonic cleaning technology will remove stains and dirt, and protect it from damage. A jeweler can perform an ultrasonic cleaning of the jewel s. The ultrasonic cleaning method will remove stains & dirt and protect it from damage. An ultrasonic cleaner cleans ornaments very well, with stones, and the places where they are fixed, which cannot be done manually at home by standard methods. 

How ultrasonic cleaning works 

Ultrasonic waves are sound waves that produce 50,000 ultrasonic vibrations per second and exceeds the threshold of human audibility. 

An ultrasonic cleaner instantly leads to the formation of small bubbles in liquids. Waves generated by ultrasound alternating between low and high pressure lead to the formation of bubbles that creates a microscopic effect that performs cleaning at a deeper level. This ultrasonic process, in combination with detergents or chemicals, leads to the active removal of contaminants from the surface of the jewelry to be cleaned. 

Ultrasonic cleaning allows you to get rid of all possible contaminants: solid and liquid oil slicks, greases, limestone, dust, corrosion. 

The Cleaning Process 

After filling the sink with hot water and pouring the cleaning liquid, you can put your jewelry inside. Don't put too many items at once to avoid scratches on the jewels. 

Turn on the device and let it work until the jewelry is clean. (Depending on the degree of contamination of the elements, this time typically ranges from 1 to 20 minutes.) 

After cleaning, turn off the appliance and leave the jewelry inside for another 5 to 10 minutes so that the dirt particles that have been thrown by the sound waves can fall to the bottom of the tank. 

Then after removing your jewelry, you can brush it lightly with a soft brush to make sure any residual dirt is removed, especially ring holders. Rinse the items to wash any remaining detergent and dry them with a soft cloth. 

How often should an Ultrasonic Cleaner be used? 

The frequency of using such type of device will depend on how fast your jewelry gets dirty. In general, you can clean your jewelry with ultrasound every few weeks.